Hydraulic Valves
83
IH-TDB-001-C/EN wrc_2015-02-03 IH-TDB-001-C/EN wrc_2015-02-03
Surface nish
6x M12x75
DIN 912 12.9
108 Nm
±15%
Surface nish
6x M20x90
DIN 912 12.9
517 Nm
±15%
Pilot Operated Proportional DC Valves
with position feedback
2.6
Characteristics HP**VW
The pilot operated proportional directional valves HP**VW
are available in 4 sizes:
HP10VW – NG10 (CETOP 05)
HP16VW – NG16 (CETOP 07)
HP25VW – NG25 (CETOP 08)
HP32VW – NG32 (CETOP 10)
The digital onboard electronics is situated in a robust
metal housing, which allows the usage under rough
environmental conditions.
The nominal values are factory set. The cable connection
to a serial RS232 interface is available as accessory.
The innovative integrated regenerative function into the Aline
(optional) allows energy saving circuits for differential
cylinders. The hybrid version can be switched between
regenerative mode and standard mode at any time.
Technical Features:
• Progressive ow characteristics for sensitive adjustment
• Low hysteresis
• High dynamics
• High ow capacity
• Centre position monitoring optional
• Energy saving A-regeneration optional
• Switchable hybrid version optional
D_1FC DE.indd RH 05.05.2014
3-36
Vorgesteuertes Proportional-Wegeventil
Serie D*1FC
3
Katalog HY11-3500/DE
Parker Hannifin Corporation
Hydraulics Group
Kenndaten
D41FC
Zentralsteckverbindung
(immer auf der B-Seite
der Hauptstufe)
Standard D*1FCD41FC
Die Serie vorgesteuerter Proportional-Wegeventile
D*1FC mit Wegaufnehmer wird in 4 Größen angeboten:
D31FC – NG10 (CETOP 05)
D41FC – NG16 (CETOP 07)
D91FC – NG25 (CETOP 08)
D111FC – NG32 (CETOP 10)
Die digitale Onboard Elektronik ist sicher in einer robusten
Metallbox untergebracht und erlaubt den Einsatz unter
rauen Umgebungsbedingungen.
Die Ventile sind ab Werk auf die Nominalwerte eingestellt.
Das Kabel zum Anschluss an eine serielle RS232 Schnitt-
stelle ist als Zubehör erhältlich.
Die optionale integrierte Rückspeisefunktion in den
A-Kanal ermöglicht energiesparende Schaltungen mit
Differentialzylindern. Die Hybridvariante kann zwischen
Rückspeisung und Standardschaltung jederzeit um-
schalten.
Hybrid D*1FCZ
Rückspeisung D*1FCR
Technische Merkmale
• Progressive Durchflusscharakteristik zur feinfühligen
Volumenstromsteuerung
• Geringe Hysterese
• Hohe Dynamik
• Höchste Volumenströme
• Grundstellungsüberwachung optional
• Energiesparende A-Rückspeisung (optional)
• Schaltbare Hybrid-Version (optional)
Weiterführende Literatur über die Möglichkeiten
der Energieeinsparung und weitere Details zur inte-
grierten Rückspeisefunktion steht auf Anfrage zur
Verfügung.
Parametrierstecker
Nothand-
betätigung
TAPB
A
B
3-58
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Characteristics
The pilot operated proportional directional valves D*1FC
are available in 4 sizes:
D31FC - NG10 (CETOP 05)
D41FC - NG16 (CETOP 07)
D91FC - NG25 (CETOP 08)
D111FC - NG32 (CETOP 10)
The digital onboard electronics is situated in a robust
metal housing, which allows the usage under rough en-
vironmental conditions.
The nominal values are factory set. The cable connection
to a serial RS232 interface is available as accessory.
The innovative integrated regenerative function into the A-
line (optional) allows energy saving circuits for differential
cylinders. The hybrid version can be switched between
regenerative mode and standard mode at any time.
Main connector
(always on B-side of main stage)
Technical Features
• Progressive flow characteristics for sensitive adjust-
ment
• Low hysteresis
• High dynamics
• High flow capacity
• Centre position monitoring optional
• Energy saving A-regeneration optional
• Switchable hybrid version optional
Further literature about the opportunities of energy
savings and more functional details of the integrated
regeneration is available on request.
Standard D*1FCD41FC
Hybrid D*1FCZ
Regeneration D*1FCR
D41FC
Parametrizing
connection
Manual
override
TAPB
A
B
Hydraulic Valves
84
IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
Technical Data HP**VW
Technical Data HP10VW HP16VW HP25VW HP32VW
General
Actuation Proportional solenoid
Size NG10 (CETOP05) NG16 (CETOP07) NG25 (CETOP08) NG32 (CETOP10)
Mounting interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPA
Mounting position unrestricted
Ambient temperature °C -20...+60
MTTF
D
- value years 50
Weight kg 9,0 12,5 21,0 68,5
Vibration resistance g
10 Sinus 5...200 Hz acc. IEC 68-2-6 / 30 Random noise 20...20 Hz acc. IEC 68-2-36
15 Shock acc. IEC 68-2-27
Hydraulic
Max. operating pressure bar
Pilot drain internal: P, A, B, X 350; T, Y 210
Pilot drain external: P, A, B, T, X 350; Y 210
Fluid Hydraulic oil as per DIN 51524 ... 51535,
Fluid temperature °C -20...+60
Viscosity permitted cSt 20...380
Viscosity recommended cSt 30...80
Filtration ISO 4406 (1999) 18/16/13 (NAS 1638: 7)
Nominal ow
at Dp=5 bar per control edge
l/min 90/120 200 450 1000
Leakage at
100 bar
main stage ml/min 200 200 600 1000
pilot stage ml/min <100
Pilot supply pressure bar 20...350
Pilot ow, step response l/min 2,9 4,1 6,7 15
Static / Dynamic
Step response at 100 % step ms 35 37 66 120
Hysteresis % < 0,1
Sensitivity % < 0,05
Electrical characteristics
Duty ratio % 100
Protection class IP65 in accordance with EN 60529 (with correctly mounted plug-in connector)
Supply voltage/ripple DC V 18...30, ripple < 5 % eff., surge free
Current consumption max. A 2,0
Pre fusing medium lag A 2,5
Command
signal
Voltage V 10...0...-10, ripple <0.01 % eff., surge free, 0...+10 V P—>A (P—>B)
Impedance kOhm 100
Current mA
20...0...-20, ripple <0.01 % eff., surge free, 0...+20 mA P—>B
4...12...20, ripple <0.01 % eff., surge free, 12...20 mA P—>A
< 3.6 mA = enable off, > 3.8 mA = enable on acc. to NAMUR NE43
Impedance Ohm 200
Differential input max. V
30 for terminal D and E against PE (terminal G)
11 for terminal D and E against 0 V (terminal B)
Hydraulic Valves
85
IH-TDB-001-C/EN wrc_2015-02-03 IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
Technical Data HP**VW
Electrical characteristics
Adjustment
ranges
Min % 0...50
Max % 50...100
Ramp s 0...32,5
Interface V RS 232, parametrizing connection 5pole
EMV EN 61000-6-2, EN 61000-6-4
Electrical connection 6 + PE acc. to EN 175201-804
Wiring min. 7 x 1,0 (AWG16) overall braid shield
Wiring length max. 50
Electrical monitor switch
Protection class IP65 in accordance with EN 60529 (with correctly mounted connector)
Ambient temperature °C 0-70
Supply voltage/ripple V 18...42, ripple < 10 % eff.
Current consumption without load mA < 30
Max. output current per channel mA 400
Min. output load per channel mA 100
Max. output drop at 0,2A / 0,4A V <1,1 / <1,6
EMC EN61000-6-2, EN61000-6-4
Max. tol. ambient eld strength A/m 1200
Interface 4+PE nach IEC 61076-2-101 (M12)
Wiring min. mm² 5 x 0.5 (AWG 20) overall braid shield
Wiring lenght max. m 50
3-64
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Monitor switch M12x1 pin assignment
1 + Supply 18...42 V
2 output B (normally closed)
3 0 V
4 output A (normally closed)
5 Earth ground
The neutral position is monitored. The signal changes
after less than 10 % of the spool stroke.
Signal Output A (pin 4) Output B (pin 2)
neutral closed closed
open closed
closed open
Protection class IP65 in accordance with EN 60529 (with correctly mounted plug-in connector)
Ambient temperature [°C] 0-70
Supply voltage/ripple [V] 18...42, ripple < 10 % eff.
Current consumption without load [mA] < 30
Max. output current per channel, ohmic [mA] 400
Min. output load per channel, ohmic [kOhm] 100
Max. output drop at 0.2 A [V] < 1.1
Max. output drop at 0.4 A [V] < 1.6
EMC EN61000-6-2, EN61000-6-4
Max. tol. ambient field strength [A/m] 1200
Min. distance to next AC solenoid [m] 0.1
Interface 4+PE acc. IEC 61076-2-101 (M12)
Wiring min. [mm²] 5 x 0.5 (AWG 20) overall braid shield
Wiring lenght max. [m] 50
Electrical monitor switch
Monitor Switch
Wiring
Code 0, 6 + PE acc. EN 175201-804 Code 7, 6 + PE acc. EN 175201-804 + enable
=
~
V
A
F
B
E
C
G
D
0
o
+
Power supply
24 V
Command
0...±10 V
0...±10 V
4...20m A
0...±20m A
Diagnostics
valve stroke
=
~
V
A
F
B
E
C
G
D
0
o
o
+
+
Power supply
24 V
Enable
Command
0...±10 V
0...±10 V
4...20 mA
0...±20 mA
5...30 V
Diagnostics
valve stroke
3-64
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Monitor switch M12x1 pin assignment
1 + Supply 18...42 V
2 output B (normally closed)
3 0 V
4 output A (normally closed)
5 Earth ground
The neutral position is monitored. The signal changes
after less than 10 % of the spool stroke.
Signal Output A (pin 4) Output B (pin 2)
neutral closed closed
open closed
closed open
Protection class IP65 in accordance with EN 60529 (with correctly mounted plug-in connector)
Ambient temperature [°C] 0-70
Supply voltage/ripple [V] 18...42, ripple < 10 % eff.
Current consumption without load [mA] < 30
Max. output current per channel, ohmic [mA] 400
Min. output load per channel, ohmic [kOhm] 100
Max. output drop at 0.2 A [V] < 1.1
Max. output drop at 0.4 A [V] < 1.6
EMC EN61000-6-2, EN61000-6-4
Max. tol. ambient field strength [A/m] 1200
Min. distance to next AC solenoid [m] 0.1
Interface 4+PE acc. IEC 61076-2-101 (M12)
Wiring min. [mm²] 5 x 0.5 (AWG 20) overall braid shield
Wiring lenght max. [m] 50
Electrical monitor switch
Monitor Switch
Wiring
Code 0, 6 + PE acc. EN 175201-804 Code 7, 6 + PE acc. EN 175201-804 + enable
=
~
V
A
F
B
E
C
G
D
0
o
+
Power supply
24 V
Command
0...±10 V
0...±10 V
4...20m A
0...±20m A
Diagnostics
valve stroke
=
~
V
A
F
B
E
C
G
D
0
o
o
+
+
Power supply
24 V
Enable
Command
0...±10 V
0...±10 V
4...20 mA
0...±20 mA
5...30 V
Diagnostics
valve stroke
Hydraulic Valves
86
IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
Ordering Code HP**VW
HP 10
Size
10 NG10 (Cetop 05)
16 NG16 (Cetop 07)
25 NG25 (Cetop 08)
32 NG32 (Cetop 10)
V
01A 01
Spool type
Spool type Spool type
01A 04A*
02A 05A*
08A
* Q
B
= Q
A
/2
Control
V pilot operated
Actuation
HP
Proportional
valve
N P
Connector
P 6 + PE acc. EN175201-804
Seals
N NBR
V VITON
I420
Electronic options
Signal
U010 0...+10V
I420 4 ... 20mA
I020 0 ... 20mA
Design
W
Integrated electronics
with position feedback
VA
Flow [l/min]
NG10 NG16 NG25 NG32
01 90
- - -
02 120
- - -
03 - 200 - -
04 - - 450 -
05 - - - 1000
II
Pilot connection
Inlet Drain
IE internal external
EE external external
II internal internal
EI external internal
00
00 Standard
Hydraulic Valves
87
IH-TDB-001-C/EN wrc_2015-02-03 IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
Characteristic Curves / Pilot Flow HP**VW
3-62
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Technical Data / Characteristic Curves
Electrical characteristics
Duty ratio [%] 100
Protection class IP65 in accordance with EN 60529 (with correctly mounted plug-in connector)
Supply voltage/ripple DC [V] 18...30, ripple < 5 % eff., surge free
Current consumption max. [A] 2.0
Pre fusing medium lag [A] 2.5
Command signal
Code K (B) Voltage
Impedance
Code E Current
Impedance
Code S Current
[V]
[kOhm]
[mA]
[Ohm]
[mA]
10...0...-10, ripple <0.01 % eff., surge free, 0...+10 V P—>A (P—>B)
100
20...0...-20, ripple <0.01 % eff., surge free, 0...+20 mA P—>B
200
4...12...20, ripple <0.01 % eff., surge free, 12...20 mA P—>A
< 3.6 mA = enable off, > 3.8 mA = enable on acc. to NAMUR NE43
Impedance [Ohm] 200
Differential input max. Code 0/7
Code 0
[V]
[V]
30 for terminal D and E against PE (terminal G)
11 for terminal D and E against 0 V (terminal B)
Adjustment ranges Min [%] 0...50
Max [%] 50...100
Ramp [s] 0...32.5
Interface RS 232, parametrizing connection 5pole
EMC EN 61000-6-2, EN 61000-6-4
Electrical connection 6 + PE acc. to EN 175201-804
Wiring min. [mm²] 7 x 1.0 (AWG16) overall braid shield
Wiring length max. [m] 50
All characteristic curves measured with HLP46 at 50 °C.
Electrical characteristics hybrid option
Duty ratio [%] 100
Protection class IP 65 in accordance with EN 60529 (with correctly mounted plug-in connector)
Supply voltage [V] 24
Tolernace supply voltage [%] ±10
Current consumption [A] 1.21
Power consumption [W] 29
Solenoid connection Connector as per EN 175301-803
Wiring min. [mm²] 3 x 1.5 recommended
Wiring length max. [m] 50 recommended
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
P-B
A-T
P-A
B-T
Command signal [%]
-80
100
[% of nominal flow]Flow Q
-60 -40 -20 020406080 100-100
75
50
25
0
(E*)
50%
(B*)
B-TP-B
P-A
B-T
P-B
A-T
Command signal [%]
-80
100
[% of nominal flow]Flow Q
-60 -40 -20 020406080 100-100
75
50
25
0
(E*)
50%
(B*)
B-TP-B
D41FC
Spool code E01, E02, B31, B32
D*1FC B/E Flow characteristics
at Dp = 5 bar per metering edge
D31FC
Spool code E01, E02, B31, B32
3-63
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Characteristic Curves
D111FC
Spool type E01, E02, B31, B32
Flow curves
D91FC
Spool type E01, E02, B31, B32
P-A
B-T
P-B
A-T
Command signal [%]
-80
100
[% of nominal flow]Flow Q
-60 -40 -20 020406080 100-100
75
50
25
(E*)
50%
(B*)
B-TP-B
Command signal [%]
-80
100
[% of nominal flow]Flow Q
P-A
B-T
P-B
A-T
-60 -40 -20 020406080 100-100
75
50
25
0
(E*)
50%
(B*)
B-TP-B
D111FC
spool type R/Z* on request
Flow curves D*1FCR/Z
at Dp = 5 bar per metering edge
D31FC
Spool type R31, R32
D91FC
Spool type R31, R32, Z31, Z32
D41FC
Spool type R31, R32, Z31, Z32
P-B
A-T
P-A
B-T
1)
1)
with 2 tank ports
-100
100
75
50
25
0
-80 -60 -40
-20
0
20 40 60 80 100
50%
(R* )
Command signal [%]
Flow [% of nominal flow]Q
All characteristic curves measured with HLP46 at 50 °C.
HP10VW HP16VW
HP25VW HP32VW
Q/2
Q/2 Q/2
Q/2
3-66
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Pilot Flow
1/16"NPTF
1/16"NPTF
X
B
C
Y
T
()drawn offset
P
M6 DIN906
1/16 NPTF
T
C
B
P
B
C 1/16"NPTF
1/16"NPTF
X
()drawn offset
open, closed
Pilot oil
Inlet
Drain
BC
internal
external
internal
external
external
external
internal
internal
D31FCB/E D31FCR
D41FCB/E D41FCR D41FCZ
D91FCB/E D91FCR D91FCZ
D111FCB/E D111FCR D111FCZ
P
xy
A
T
B
B
C
a
b
0
B
A
)( )(
Pilot oil inlet (supply) and outlet (drain)
D_1FC DE.indd RH 05.05.2014
3-44
Vorgesteuertes Proportional-Wegeventil
Serie D*1FC
3
Katalog HY11-3500/DE
Parker Hannifin Corporation
Hydraulics Group
Steuerölführung
1/16"NPTF
1/16"NPTF
X
B
C
Y
T
()versetzt gezeichnet
P
M6 DIN906
1/16 NPTF
T
C
B
P
B
C 1/16"NPTF
1/16"NPTF
X
()versetzt gezeichnet
intern
extern
intern
extern
extern
extern
intern
intern
offen, geschlossen
Steueröl
Zulauf
Ablauf
BC
D31FCB/E
D31FCR
D41FCB/E D41FCR D41FCZ
D91FCB/E D91FCR D91FCZ
D111FCB/E D111FCR D111FCZ
P
xy
A
T
B
B
C
a
b0
B
A
)( )(
Steuerölführung Eingang (Zulauf) und Ausgang (Ablauf)
D_1FC DE.indd RH 05.05.2014
3-44
Vorgesteuertes Proportional-Wegeventil
Serie D*1FC
3
Katalog HY11-3500/DE
Parker Hannifin Corporation
Hydraulics Group
Steuerölführung
1/16"NPTF
1/16"NPTF
X
B
C
Y
T
()versetzt gezeichnet
P
M6 DIN906
1/16 NPTF
T
C
B
P
B
C 1/16"NPTF
1/16"NPTF
X
()versetzt gezeichnet
intern
extern
intern
extern
extern
extern
intern
intern
offen, geschlossen
Steueröl
Zulauf
Ablauf
BC
D31FCB/E D31FCR
D41FCB/E
D41FCR D41FCZ
D91FCB/E D91FCR D91FCZ
D111FCB/E D111FCR D111FCZ
P
xy
A
T
B
B
C
a
b0
B
A
)( )(
Steuerölführung Eingang (Zulauf) und Ausgang (Ablauf)
D_1FC DE.indd RH 05.05.2014
3-44
Vorgesteuertes Proportional-Wegeventil
Serie D*1FC
3
Katalog HY11-3500/DE
Parker Hannifin Corporation
Hydraulics Group
Steuerölführung
1/16"NPTF
1/16"NPTF
X
B
C
Y
T
()versetzt gezeichnet
P
M6 DIN906
1/16 NPTF
T
C
B
P
B
C 1/16"NPTF
1/16"NPTF
X
()versetzt gezeichnet
intern
extern
intern
extern
extern
extern
intern
intern
offen, geschlossen
Steueröl
Zulauf
Ablauf
BC
D31FCB/E D31FCR
D41FCB/E D41FCR D41FCZ
D91FCB/E
D91FCR D91FCZ
D111FCB/E D111FCR D111FCZ
P
xy
A
T
B
B
C
a
b0
B
A
)( )(
Steuerölführung Eingang (Zulauf) und Ausgang (Ablauf)
D_1FC DE.indd RH 05.05.2014
3-44
Vorgesteuertes Proportional-Wegeventil
Serie D*1FC
3
Katalog HY11-3500/DE
Parker Hannifin Corporation
Hydraulics Group
Steuerölführung
1/16"NPTF
1/16"NPTF
X
B
C
Y
T
()versetzt gezeichnet
P
M6 DIN906
1/16 NPTF
T
C
B
P
B
C 1/16"NPTF
1/16"NPTF
X
()versetzt gezeichnet
intern
extern
intern
extern
extern
extern
intern
intern
offen, geschlossen
Steueröl
Zulauf
Ablauf
BC
D31FCB/E D31FCR
D41FCB/E D41FCR D41FCZ
D91FCB/E D91FCR D91FCZ
D111FCB/E D111FCR D111FCZ
P
xy
A
T
B
B
C
a
b0
B
A
)( )(
Steuerölführung Eingang (Zulauf) und Ausgang (Ablauf)
HP10VW
HP16VW HP25VW
HP32VW
Hydraulic Valves
88
IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
Dimensions HP**VW
3-67
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Dimensions
D31FC
D41FC
Surface finish
BK385
4x M6x40
ISO 4762-12.9
13.2 Nm
±15 %
NBR: SK-D31FC
FPM: SK-D31FC-V
Surface finish
BK320
2x M6x55
4x M10x60
ISO 4762-12.9
13.2 Nm ±15 %
63 Nm ±15 %
NBR: SK-D41FC
FPM: SK-D41FC-V
Regenerative and hybrid function with additional plate "H10-1666L / H10-1662 / A10-1664 / A10-1665L", see chapter 12.
3-67
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
Dimensions
D31FC
D41FC
Surface finish
BK385
4x M6x40
ISO 4762-12.9
13.2 Nm
±15 %
NBR: SK-D31FC
FPM: SK-D31FC-V
Surface finish
BK320
2x M6x55
4x M10x60
ISO 4762-12.9
13.2 Nm ±15 %
63 Nm ±15 %
NBR: SK-D41FC
FPM: SK-D41FC-V
Regenerative and hybrid function with additional plate "H10-1666L / H10-1662 / A10-1664 / A10-1665L", see chapter 12.
Surface nish
4x M6x40
DIN 912 12.9
13,2 Nm ±15%
Surface nish
2x M6x55
4x M10x60
DIN 912 12.9
13,2 Nm ±15%
63 NM ±15%
HP10VW
HP16VW
Hydraulic Valves
89
IH-TDB-001-C/EN wrc_2015-02-03 IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
Dimensions HP**VW
3-68
D_1FC UK.indd RH 05.05.2014
Pilot Operated Proportional DC Valve
Series D*1FC
3
Catalogue HY11-3500/UK
Parker Hannifin Corporation
Hydraulics Group
D91FC
Dimensions
Surface finish
BK360
6x M12x75
ISO 4762-12.9
108 Nm
±15 %
NBR: SK-D91FC
FPM: SK-D91FC-V
Surface finish
BK386
6x M20x90
ISO 4762-12.9
517 Nm
±15 %
NBR: SK-D111FC
FPM: SK-D111FC-V
D111FC
HP25VW
HP32VW
Surface nish
6x M12x75
DIN 912 12.9
108 Nm ±15%
Surface nish
6x M20x90
DIN 912 12.9
517 Nm ±15%
Hydraulic Valves
90
IH-TDB-001-C/EN wrc_2015-02-03
Pilot Operated Proportional DC Valves
with position feedback
2.6
